Products

We are constantly developing and refining our processes to insure you receive the highest quality service!

We have designed and developed our own proprietary equipment for the application of Heatshield® Joint Repair and Resurfacing product. This specially designed equipment creates the smoothest possible finish with the most durable and reliable application in the chimney repair industry! Heatshield® comes with 20 year guarantee.

HeatShield® Products

HeatShield® Restores the Integrity of Your Chimney

HeatShield® is a specially formulated “Cerfractory®” sealant material that restores the integrity of your chimneyÕs flue to vent hazardous flue gases from your home. It eliminates the dangers in your chimney caused by gaps, cracks and spalling for years to come. By using either the Joint Repair System or Resurfacing System, depending on the defects found, your chimney will be restored to its original peak level of safety and efficiency.

Joint Repair System

For chimneys that only require repair of gaps caused by defective mortar joints, the Joint Repair System is used with a video camera attached to verify repairs.

With our (patent pending) Joint Repair system your chimney is fixed right, the first time.

First, a special foam applicator blade is custom made to fit your chimney. The applicator tool and blade are then plunged down your chimney and positioned below each gap or void.

The HeatShield® Cerfractory® Flue Sealant mixture is added. Each void in your flue is filled as HeatShield® mixture is extruded into the void by the tool. Your repaired void is then made smooth as the blade passes over the filled void as the tool is pulled upward.

Your repair is then immediately scanned with a specially designed video camera attached to the bottom of the tool. Your professional HeatShield® Installer then verifies that each gap or void has been properly repaired as it is immediately viewed on the cameras monitor.

Resurfacing System

For chimneys with cracked or spalled flues that are otherwise sound, the Resurfacing System is used to apply a coating over the entire flue. Cameras are used to verify repairs.

To restore your chimney’s flue by resurfacing the interior, a custom made foam applicator plug is placed at the bottom of the flue and attached to a winch on top the chimney.

First, a “tie coat” material is applied to the flue walls as the plug is pulled upward by the winch. The “tie coat” cleans any remaining dust in your flue and acts as a primer for the HeatShield® Cerfractory® Flue Sealant.

After the tie coat dries, the HeatShield® material is then applied onto the flue at a thickness of about ?” with the foam plug as it is pulled upward by the winch. This unique application method is known as “slip casting” or “slip cast extrusion”.

Your professional HeatShield® Installer then verifies that your newly restored chimney is completely sealed and smoke-tight by video scanning your completed repair.

HeatShield® Takes the “Heat” So You Don’t Have To

Developed in Europe over 20 years ago, HeatShieldÕs® Cerfractory® technology is a hybrid (ceramic/refractory) coating and has been proven to withstand moisture, corrosive flue gases and temperatures in excess of 2900¡F. HeatShield® has been independently tested. It exceeds all ASTM (American Society for Testing and Materials) and UL (Underwriters Laboratories) Outlines of Investigation for chimney repair and resurfacing products.

HeatShield® is listed to UL Subject 2425 as an approved “all fuel” chimney repair and resurfacing system. View and verify HeatShieldÕs® Listing and Product Certification from IntertekÕs Warnock Hersey Test Lab.

Your Chimney Expertly Repaired

Independent HeatShield® installers are carefully selected based on their industry certifications and experience. Armed with factory training and specially designed tools, your HeatShield® professional can expertly repair your chimney. Special video cameras are used to verify completed repairs.

Economical and Environmentally Friendly

HeatShield® is an “Eco” friendly product manufactured from recycled and natural occurring materials. HeatShield® offers you and your chimney professional a less costly alternative to rebuilding your chimney or installing a new liner.

20 Year Limited Warranty

With HeatShield® you will have the assurance of knowing your chimney is made safer and more efficient. Whether your chimney requires repair of defective mortar joints or complete resurfacing, HeatShield® is covered by a 20 year material warranty. Ask your HeatShield® professional for details.

ChimneySaver Products

Masonry waterproofing products

ChimneySaver waterproofing products are designed to waterproof all types of masonry including brick, stone, mortar, sandstone, pavers, concrete walkways, adobe, and more. These breathable water repellents keep rain and moisture out, while simultaneously allowing the masonry to breathe. These products have passed rigorous testing at Wyoming University and have been the standard in the chimney industry for over 20 years.

Crown Repair Products

Chimneys are often capped with mortar crowns instead of the recommended cast-in-place concrete crowns. If the crown is structurally sound, it can be effectively repaired with one of our three, easy to use, crown repair products. CrownCoat, CrownSeal or CrownSaver.

Creosote Removal Products

Creosote and soot buildup in your fireplace or wood stove chimney can be a fire hazard if your chimney system is not properly cleaned and maintained. Occasionally wood stoves and fireplaces can produce a tar or glaze called third-degree creosote. Cre-Away and ACS chemically modify creosote so it can be more easily removed.

Masonry Cleaning Products

These commercial strength cleaners remove smoke and creosote stains from fireplace glass, hearths, stoves, grills, brick, stone, and most hard surfaces. Powerful cleaners with almost unlimited uses around your home will clean grease and grim faster, with less effort than other household cleaners. Also will remove unsightly stains from masonry including rust, efflorescence, mortar splatter, algae, mold, mildew and more.

Roof Cleaning Products

DEFY Roof Cleaner is the first effective roof cleaning product that does not rely on chlorine bleach or sodium hydroxide. These harsh chemicals can cause damage to your roof and kill surrounding vegetation. DEFY Roof Cleaning System strikes the perfect balance between aggressive cleaning and not being harmful to your roof.

Wood Stain Products

DEFY Water-based wood stains are high performance penetrating wood stains that help prevent the destructive effects of water, fungi, and UV radiation on exterior wood. Easy to apply and easy to maintain, DEFY wood stains are durable and environmentally friendly. The semi-transparent finishes come in a variety of colors and will bring out the natural wood grain. Its penetrating finish resists flaking and peeling and will last for years.